Table of Contents
Advertisement
Appendix A. AT Commands and S-Registers
S
S Register.
SS
S String register.
_Z
Reset. Resets the AT command processor.
&W
Save. Save current configuration to EEPROM.
_U
Resets ISDN interface.
!S
Dumps status buffer contents to the DTE port.
+++
Break in. Break in AT command processor during an
active call. The break in key is defined in S2.
Carrier Detect (CD) Control Line Options
&C0
CD forced on.
&C1
CD normal.
&C2
CD off with local disconnect (LOCD)
&C3
CD off with link down.
Data Terminal Ready (DTR Control Line Options)
&D0
Ignore DTR
&D1
DTR off forces command.
&D2
Idle when off. DTR off forces idle (On allows auto
answer).
Generic Unit Configurations
&F0
Default
&F1
Configures unit for Dial 56k sync
&F2
Configures unit for Dial 64k sync
&F3
Configures unit for Dial 112k sync
&F4
Configures unit for Dial 128k sync
A-4
Express 3010/3110 User Manual
61200239L1-20
Advertisement
Table of Contents
