ADTRAN Express 3010 Manual page 94

Appendix C. Status Buffer Messages
Dump
An incoming call on either the first or second channel was discarded
by the Express 3010. The calling number is displayed if available.
ED_MISMATCH
Call is connected to different end point device. Call ISP.
FACILITY_NOT_IMPLEMENT
The network does not support the requested supplementary service.
FACILITY_NOT_SUBSCRIBED
The channel type requested has not been subscribed.
FACILITY_REJECTED
A facility requested by the user cannot be provided by the network.
Factory Reset 0
Unit defaulted to factory configuration.
FlowCtl mismatch
Bonding negotiation determined a flow control mismatch.
FlowCtl required
Bonding negotiation determined that flow control needs to be op-
tioned on.
Hangup
The call on either the first or second channel was disconnected by the
Express 3010. The far-end phone number is also displayed.
Hold
Voice call is on hold.
C-6 Express 3010/3110 User Manual 61200239L1-20