Honda Harmony HRB215SXA Owner's Manual page 65

TROUBLESHOOTING
VIBRATION PROBLEMS
Excessive Possible Cause
Correction
vibration
1. Check mower deck and Grass and debris lodged
Clean out mower deck
blade(s).
under mower deck.
(p.38).
Blade(s) loose, bent, Tighten loose blade
damaged, or unbalanced bolts. Replace damaged
by improper sharpening. blade(s) (p. 57 - 58).
2. Take mower to Honda
Mechanical damage, such
Take mower to Honda
lawn mower dealer for as a bent crankshaft.
lawn mower dealer, or
repair.
refer to shop manual.
Poor Cut Quality Or
Poor Mowing/Bagging
Performance
1. Check that the throttle
lever is in the FAST
position.
2. Reduce forward speed.
3. Check cutting height
adjustment levers.
4. Check grass bag (if
equipped).
5. Check mower deck and
blade.
Possible Cause
Correction
Engine speed is too slow Move throttle lever to
to cut well.
the FAST position
(P. 30).
Mower is moving too fast
Shift to slow speed
for lawn conditions. (p. 31) or push slower.
Adjustment levers set Set all levers at the
at different positions. same cutting height
position (p. 15).
Grass bag overfilled or Empty the grass bag.
clogged. Wash the grass bag if
clogged with dirt (p. 59).
Mower deck clogged.
Clean out the mower deck
(P. 38).
Blade(s) dull, worn, or
damaged.
Sharpen or replace
blade(s) if necessary
(p. 57 - 58).
Wrong blade(s) installed. Install correct blades
(p. 57 - 58).
63