Table of Contents
Advertisement
Preparation
for Storage
The following
steps should be taken to protect the mower whenever it will
be stored for longer than 30 days.
1. Drain the fuel tank and carburetor
into a suitable gasoline container:
A. Disconnect
the fuel line from the carburetor
and drain the fuel tank.
B. Loosen the carburetor
drain bolt to drain the carburetor.
C. Retighten the drain bolt, connect the fuel tube and turn the fuel valve
OFF.
cmm
Gasoline
is extremely
flammable
and explosive
under
certain
conditions.
Do not smoke
or allow
flames
or sparks in the area.
FUEL VALVE
2. Change the engine oil (See page 28).
NOTE: If the mower will be stored for longer than 3 months, remove the
spark plug and pour three tablespoonsful
of clean motor oil into the
cylinder. Pull the starter rope slowly two or three times to distribute the oil.
Replace the plug.
CYLINDER
24
Hide quick links:
Advertisement
Table of Contents
