Clearing Program Start Times; Temperature Setpoints; Setpoint Limits - Honeywell T7351 User Manual

7. Repeat steps 2 through 6 for all the days
desired.
8. Press Run Schedule.
Clearing Program Start
Times
1. Press Occupied or Not Occupied until the
start period to be cleared is displayed.
2. Press Day until desired day is displayed.
3. Press Clear Start Time.
4. Repeat steps 1 through 3 for all the start
times to be cleared.
5. Press Run Schedule.

Temperature Setpoints

Setpoint Limits

The setpoint temperature range is 40 to 90 °F
(4 to 32 °C) for heating and 45 to 99 °F (7 to
37 °C) for cooling.
NOTE: These limits may be restricted by the
installer to comply with local energy
codes.
Programming Temperature
Setpoints
1. Press Occupied Heat.
2. Press up
temperature is displayed.
3. Press Occupied Cool.
4. Press up
temperature is displayed.
9
or down until the desired
or down until the desired
63-2652—01