B Troubleshooting And Routine Maintenance; Troubleshooting; If You Are Having Difficulty With Your Machine - Brother DCP-350C User Manual

Troubleshooting and Routine
B
Maintenance

Troubleshooting

If you think there is a problem with your machine, check the chart below and follow the
troubleshooting tips.
Most problems can be easily resolved by yourself. If you need additional help, the Brother
Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at
http://solutions.brother.com.

If you are having difficulty with your machine

Printing
Difficulty
No printout
Poor print quality
White horizontal lines appear in text
or graphics.
The machine prints blank pages.
Suggestions
Check the interface cable on both the machine and your computer.
(See the Quick Setup Guide.)
Make sure the machine is plugged in and not turned off.
One or more ink cartridges are empty.
(See Replacing the ink cartridges on page 76.)
Check to see if the LCD is showing an error message.
(See Error messages on page 71.)
Check that the correct printer driver has been installed and chosen.
Make sure that the machine is online. Click Start and then Printers and Faxes.
Right-click and choose Brother DCP-XXXX (where XXXX is your model name),
and make sure that Use Printer Offline is unchecked.
Check the print quality. (See Checking the print quality on page 81.)
Make sure that the Media Type setting in the printer driver or the Paper Type
setting in the machine's menu matches the type of paper you are using.
®
(See Printing for Windows
-
User's Guide on the CD ROM.)
Make sure that your ink cartridges are fresh. The following may cause ink to clog:
The expiration date written on the cartridge package has passed.
(Cartridges stay usable for up to two years if kept in their original packaging.)
The ink cartridge was in your machine over six months.
The ink cartridge may not have been stored properly before use.
Try using the recommended types of paper. (See Acceptable paper and other
media on page 12.)
The recommended environment for your machine is between 20° C to 33° C.
Clean the print head. (See Cleaning the print head on page 81.)
Try using the recommended types of paper. (See Acceptable paper and other
media on page 12.)
If you want to print on Photo L or 10 × 15 cm paper, make sure you use the photo
paper tray. (See Loading photo paper on page 20.)
Clean the print head. (See Cleaning the print head on page 81.)
or Printing and Faxing for Macintosh
B
B
B
B
®
in the Software
67