Using Ps Software; Auto-Run Installation - D-Link DPR-1040 Manual

Using PS Software

Using PS Software
This chapter will introduce you to the installation and operation of the PS Software
(PS-Link) with which the MFP Server can be configured further.

Auto-Run Installation

Insert the included installation CD into your computer's CD-ROM drive to initiate the
auto-run program. If auto-run does not start, click My Computer > [CD ROM Drive
Letter].
The content of the installation CD-ROM includes:
 Install PS-Software – click this to install the PS Software, this contains
PS-Link which can configure more settings for the MFP Server, such as:
- Change the IP address
- Enabling the support of an MFP's multi-functions (Print/Scan/Copy/Fax),
GDI printing, and other software from any MFP/GDI printer.
- Easily add a printer to your computer.
 View QIG – click this to preview the Quick Installation Guide in PDF format for
step-by-step instructions of the MFP Server Installation.
 View Manual – click this to preview the User Manual in PDF format for detailed
information regarding the MFP Server.
 Adobe Reader – click this to install Acrobat Reader for the viewing and printing
of PDF files found in this Installation CD-ROM.
 Exit – click to close the Auto-Run program.
D-Link DPR-1040 Manual 17