Download Print this page

Advertisement

D-Link DPR-2000
WIRELESS G USB 4-PORT MULTIFUNCTION
PRINT SERVER
Manual
Rev. 02 (June, 2009)

Advertisement

   Also See for D-Link DPR-2000

   Summary of Contents for D-Link DPR-2000

  • Page 1

    D-Link DPR-2000 WIRELESS G USB 4-PORT MULTIFUNCTION PRINT SERVER Manual Rev. 02 (June, 2009)

  • Page 2

    FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 3: Table Of Contents

    USB Printer Ports (1 to 4)..................6 Ethernet LAN Port ....................6 Power Socket ......................6 Wireless LAN Interface ..................6 Reset Button......................6 LED Indicators.....................7 Setting up the DPR-2000..................9 Installing the Print Server ..................9 Power ON Self-Test...................10 Using the PS Software ...................12 Auto-Run Installation ..................12 PS Software ......................13 Installing PS Software ..................13...

  • Page 4

    Printing Text Files From Unix ................116 Printing from BSD Unix Versions ..............117 Printing From SCO Unix System V/386 ............120 Printing From Solaris..................122 Printing From Red Hat Linux................123 Setting up Printing in Mac OS X Tiger (10.4.9) ..........127 D-Link DPR-2000 User Manual...

  • Page 5

    Adding a Printer....................128 AppleTalk-enabled or Bonjour-enabled Printers ..........131 Setting up AppleTalk Printing in Mac OS 9 ............139 Wireless Basics ......................143 Wireless Installation Considerations ..............145 WPS (Wi-Fi Protected Setup).................147 Technical Specifications..................148 Appendix: DPR-2000 Printer Compatibility List ..........150 D-Link DPR-2000 User Manual...

  • Page 6: Before You Begin

    Package Contents Before You Begin Package Contents: Your DPR-2000 package should contain the following: D-Link DPR-2000 USB 2.0 Multifunction Print Server Manual and Warranty on CD Printed Quick Installation Guide Cat. 5 Ethernet cable If any of the above items are missing, please contact your reseller.

  • Page 7: Introduction

    Windows-based networks. Protocol support for TCP/IP, NetBEUI and AppleTalk is provided to ensure seamless connection to major networking operating systems. In addition to this software, the DPR-2000 also has a built in web configurator that allows the administrator to configure it and manage the multiple print queues through TCP/IP, using a standard web browser program.

  • Page 8

    The DPR-2000 provides a PS-Wizard to let you easily add a network printer on Windows for traditional TCP/IP printing. The DPR-2000 is compatible with the following network operating systems and...

  • Page 9

    For more information see the Using the PS Software chapter. PS-Wizard - This tool allows you to easily add a printer to your computer. For more information see the Using the PS Software chapter. D-Link DPR-2000 - User Manual...

  • Page 10: External Features

    External Features External Features The DPR-2000’s USB printer ports are located on the rear panel of this Print Server and are configurable using the web configurator. The default IP address of the DPR-2000 is automatically acquired from a DHCP server on the network. If a DHCP server cannot be found, use the default IP address for the DPR-2000, which is 192.168.0.10.

  • Page 11: Usb Printer Ports (1 To 4)

    The 802.11g wireless LAN (WLAN) interface and its antenna are hidden inside this device. This interface connects to your wireless AP or router. Reset Button Pressing this button will reset the Print Server to its default factory configuration settings. D-Link DPR-2000 - User Manual...

  • Page 12: Led Indicators

    Ethernet network. This light will also blink when the Print Server is receiving or transmitting data on the wired network. These three LED indicators are also used during the Print Server’s Power-ON Self Test to indicate any hardware failures. D-Link DPR-2000 - User Manual...

  • Page 13

    This light will also blink when the Print Server is receiving or transmitting wireless data on the network. All LED indicators described above are also used during the Print Server’s Power-ON Self Test to indicate any hardware failures. D-Link DPR-2000 - User Manual...

  • Page 14: Setting Up The Dpr-2000

    Setting up the DPR-2000 Setting up the DPR-2000 Installing the Print Server WARNING: Configuration problems may result if you power ON the Print Server without first establishing its network connection. - Use power adapter supplied with this Print Server to connect to an AC source.

  • Page 15: Power On Self-test

    This section will describe the installation steps for a wired Ethernet connection. Follow the steps below to avoid any complications during the hardware installation: 1. Confirm that all the printers that you will connect to the DPR-2000 are operating correctly.

  • Page 16

    DRAM error 1 long 3 short Flash Protected 1 long 5 short Flash Erase/Program error 1 long 6 short LAN Controller error 1 long 14 short LAN MII error 1 long 18 short USB error D-Link DPR-2000 - User Manual...

  • Page 17: Using The Ps Software

    Print Server. • Install Acrobat Reader – Click this to install Acrobat Reader for the viewing and printing of PDF files found on this Installation CD-ROM. • Exit – Click to close the Auto-Run program. D-Link DPR-2000 User Manual...

  • Page 18: Ps Software

    Installing PS Software 1. Click the Next > button in the welcome window of the InstallShield Wizard. 2. Specify the destination location by clicking the Browse… button. Otherwise, click the Next > button to continue. D-Link DPR-2000 - User Manual...

  • Page 19

    Click the Finish button to complete the installation. After installing the program, you can access the two utilities (PS-Link and PS-Wizard) by clicking Start Programs PS Software. D-Link DPR-2000 - User Manual...

  • Page 20: Using Ps-link

    If the installation has been successful, you will see that the name of your Print Server has been discovered and is listed in the Server Name column. If your Print Server is not listed, please check your network connectivity and click the Discover button again. D-Link DPR-2000 - User Manual...

  • Page 21

    There are also three buttons: Setup Wizard, Change IP Address, and Web Setup. Here is an explanation of each button: [Setup Wizard] – Setup Wizard will allow you to configure your Print Server step by step. When this button is clicked, the following screen will display. D-Link DPR-2000 - User Manual...

  • Page 22

    Click Next > to begin configuring the settings. System Settings Enter the Server Name, Port Name and Password for your Print Server. Click Next > to continue to the next page, or Cancel to exit. D-Link DPR-2000 - User Manual...

  • Page 23

    Print Server. Click Next > to continue to the next page, or Cancel to exit. Microsoft Network Workgroup Type the name of the Microsoft Workgroup. Click Next > to continue to the next page, or Cancel to exit. D-Link DPR-2000 - User Manual...

  • Page 24

    AppleTalk Settings (Optional) Enter the AppleTalk Zone or just type “*” if your AppleTalk network is not divided into zones. Type the Printer Type. Click Next > to continue to the next page or Cancel to exit. D-Link DPR-2000 - User Manual...

  • Page 25

    Assign to enter a specific IP address for the Print Server, or DHCP Assign Automatically to have an IP address automatically assigned to the Print Server. Click OK to save your changes, or Cancel to abort. D-Link DPR-2000 - User Manual...

  • Page 26

    About: Click this to display the PS-Link version number. Click the OK button to close this window. Close: To exit PS-Link, click this button. D-Link DPR-2000 - User Manual...

  • Page 27: Installing And Using A Multifunction Printer Multifunction/gdi Printer

    USB cable to your computer. 3. The installation steps will be different depending on the printer and manufacturer brand. Below you will find diagrams for several printers from different manufacturers: D-Link DPR-2000 - User Manual...

  • Page 28

    2. When the installation of all drivers has been completed, you may use the PS-Link utility to complete the physical connection between the MUTIFUNCTION/GDI printer and your computer by clicking the Link button. D-Link DPR-2000 - User Manual...

  • Page 29

    Using the PS Software If the connection is successfully established, the following message will be displayed. Press OK to exit. 3. Now the MUTIFUNCTION/GDI printer is ready for use from your computer. D-Link DPR-2000 - User Manual...

  • Page 30

    MUTIFUNCTION/GDI printer to your computer, do ignore this prompt message. Use PS-Link to simulate a USB connection between your printer and computer. 2. To do this, launch the PS-Link utility and click the Link button. D-Link DPR-2000 - User Manual...

  • Page 31

    3. Continue with the installation of the MUTIFUNCTION/GDI printer by inserting the CD-ROM in your computer and proceed with the remaining steps. 4. When the installation is completed, you may start to use the multiple functions (Print/Scan/Copy/Fax) of the MUTIFUNCTION/GDI printer from your computer. D-Link DPR-2000 - User Manual...

  • Page 32

    1. When the installation program asks you to connect the USB cable of the MUTIFUNCTION/GDI printer to your computer, do not ignore this prompt message. Use PS-Link to simulate a USB connection between your printer and computer. 2. Launch the PS-Link utility and click the Link button. D-Link DPR-2000 - User Manual...

  • Page 33

    3. Continue with the installation of the MUTIFUNCTION/GDI printer by inserting the CD-ROM in your computer and proceed with the remaining steps. 4. When the installation is completed, you may start to use the multiple functions (Print/Scan/Copy/Fax) of the MUTIFUNCTION/GDI printer from your computer. D-Link DPR-2000 - User Manual...

  • Page 34

    1. When the installation program asks you to connect the USB cable of the MUTIFUNCTION/GDI printer to your computer, do not ignore this prompt message. Use PS-Link to simulate a USB connection between your printer and computer. 2. Launch the PS-Link utility and click the Link button. D-Link DPR-2000 - User Manual...

  • Page 35

    3. Continue with the installation of the MUTIFUNCTION/GDI printer by inserting the CD-ROM in your computer and proceed with the remaining steps. 4. When the installation is completed, you may start to use the multiple functions (Print/Scan/Copy/Fax) of the MUTIFUNCTION/GDI printer from your computer. D-Link DPR-2000 - User Manual...

  • Page 36

    1. When the installation program asks you to connect the printer to your computer, just ignore it and click the Next> button to continue. 2. The program will prompt you again to connect the two devices, click No and continue with the rest of the installation. D-Link DPR-2000 - User Manual...

  • Page 37

    Click the Link button in the PS-Link window below. When the connection is successful established, the following message will be displayed. Press OK to exit. 4. Now the MUTIFUNCTION/GDI printer is ready to use from your computer. D-Link DPR-2000 - User Manual...

  • Page 38

    1. When the installation program asks you to connect the USB cable of the MUTIFUNCTION/GDI printer to your computer, do not ignore this prompt message. Use PS-Link to simulate a USB connection between your printer and computer. 2. Launch the PS-Link utility and click the Link button. D-Link DPR-2000 - User Manual...

  • Page 39

    3. Continue with the installation of the multifunction/GDI printer by inserting the CD-ROM in your computer and proceed with the remaining steps. 4. When the installation is completed, you may start to use the multiple functions (Print/Scan/Copy/Fax) of the MUTIFUNCTION/GDI printer from your computer. D-Link DPR-2000 - User Manual...

  • Page 40

    To do this, you need to use PS-Link to link the two devices: Launch the PS-Link utility and click the [Link] button. When a connection has been successfully established, the following message will be displayed. Press OK to exit. D-Link DPR-2000 - User Manual...

  • Page 41

    Using the PS Software 3. Now the multifunction/GDI printer is ready to use from your computer. D-Link DPR-2000 - User Manual...

  • Page 42: Using Ps-wizard

    The PS-Wizard also allows you to change the IP address settings for the Print Server, including its IP address, Subnet Mask address and default Gateway address. Go to Start PS Software, and select PS-Wizard. Programs D-Link DPR-2000 - User Manual...

  • Page 43

    Print Server. Click Apply button to implement the new settings. Port Information: This is the main function of the PS-Wizard and enables you to easily add a printer onto your computer. To add a printer, click Add Printer. The following window will appear: D-Link DPR-2000 - User Manual...

  • Page 44

    Click the Next > button to continue when you have selected the desired driver. 3. Have Disk: Click the Have Disk button to bring up the following window. Insert the manufacturer’s installation CD to install the printer driver. Select the driver; then click OK to continue. D-Link DPR-2000 - User Manual...

  • Page 45

    Verify the configuration, then click Next > to continue. The printer icon (in this case the HP Laser Jet 2000) will be automatically created in the Windows’ Printers and Faxes screen, as shown in the following illustration. D-Link DPR-2000 - User Manual...

  • Page 46

    If everything operates as normal, click Finish to exit. If the test failed, check to see if the driver program is correct, the printer is powered ON an d connected, and the Print Server is up and running on the network. D-Link DPR-2000 - User Manual...

  • Page 47: Using The Web Configurator

    Another way to access the web configurator is to type in the IP address of your DPR-2000 at the URL address field of the web browser. The default IP address of your DPR-2000 is 192.168.0.10, but this may have changed if you have a DHCP server on your network.

  • Page 48

    Setup, Advanced, Maintenance, Status, and Help. Clicking a link from the bar will display its submenu. Selecting an option from the submenu will display the content in the center column. D-Link DPR-2000 - User Manual...

  • Page 49

    The Print Server Setup screen allows you to modify the Print Server Name and the Port Name, Description and PJL Printer selection of each of the printers connected to your DPR-2000. Do not change these settings unless you are asked to do so by your network administrator.

  • Page 50: Setup > Lan Setup

    Print Server. If you click Manually Assign, enter the information in these boxes: IP Address, Subnet Mask, and Default Gateway. If you have made changes to this screen, click Apply Settings to save them. To abort and exit, click Cancel. D-Link DPR-2000 - User Manual...

  • Page 51: Setup > Wireless Setup

    Print Server to a wireless router or an access point of your network. Wireless computers accessing the printers will connect to your Print Server via the wireless router or access point. Do as follows to connect your Print Server to a wireless router or access point: D-Link DPR-2000 - User Manual...

  • Page 52

    2. Select an SSID from the Site Survey list, or leave it as default. 3. Select a wireless Channel that will be used between the wireless computer and your Print Server. 4. For Transmission Rate, select a wireless speed from the list or leave it as Fully Automatic. D-Link DPR-2000 - User Manual...

  • Page 53

    Do as follows to set up WEP encryption: 1. Click WEP Encryption. 2. For the encryption key length, select 64bits or 128bits in the Length field. 3. For the encryption key string, select the format by clicking ASCII or HEX in the D-Link DPR-2000 - User Manual...

  • Page 54

    Print Server before your wireless computers. - Your wireless signal may degrade when you enable encryption, due to the added overhead. Wi-Fi PROTECTED SETUP (WPS) Wi-Fi Protected Setup (WPS) is a Wi-Fi standard for easy and secure establishment D-Link DPR-2000 - User Manual...

  • Page 55

    1. Make sure that your router or access point also supports WPS. 2. On the WIRELESS SETUP screen, click the WPS button. 3. The following screen will appear: 4.Click Next. The following Windows dialog box will appear: D-Link DPR-2000 - User Manual...

  • Page 56

    WPS program, on the Windows dialog box shown in step 4 above, click Run to start running the WPS Installation Wizard inside the Print Server’s firmware. Your Print Server will pick up the broadcast signals from the router or access point and apply its wireless settings. D-Link DPR-2000 - User Manual...

  • Page 57: Setup > Printer Setup

    2. From the user’s computer, access the Print Server's web configurator. On the left column of the web configurator’s main screen, click Printer Setup to display following screen: 3. Click Next to display the following Windows Wizard program dialog box: D-Link DPR-2000 - User Manual...

  • Page 58

    (such as HP LaserJet 2000), the Print Server’s name (such as dlink-334455), and the name of the port to which the printer is connected (such as dk-334455-U1, where U1 is USB port number 1). Select the target printer, then click Next > to continue. D-Link DPR-2000 - User Manual...

  • Page 59

    Manufacturers and Printer Models boxes. Select the target printer’s manufacturer and model, then click Next > to continue. If your target printer is not on the boxes, try the next option. D-Link DPR-2000 - User Manual...

  • Page 60

    Use this printer as the default printer for Windows-based programs box. Since you can connect up to four printers to your Print Server, you should include the printer port number in the Network Printer Name to make it easy to get identified. D-Link DPR-2000 - User Manual...

  • Page 61

    Windows’ Printers and Faxes screen. When the following screen displays, you can perform a print test by clicking the Print Test Page button. If everything is operating normally, click OK, then click Finish to exit. D-Link DPR-2000 - User Manual...

  • Page 62: Advanced > Advanced Lan

    (i.e. when it is powered ON). UPnP: This option allows you to enable or disable UPnP. If you select Enable, your Print Server will be automatically discovered and placed in Windows' list D-Link DPR-2000 - User Manual...

  • Page 63

    Font Group: Select the Font Group from the drop -down list box. Once you have completed the settings for each printer port, click Apply Settings to store the settings. To abort and exit, click Cancel. D-Link DPR-2000 - User Manual...

  • Page 64: Advanced > Advanced Wireless

    Print Server is Long Preamble. To change this, clic k Short. Once you have completed the settings for each printer port, click Apply Settings to store the settings. To abort and exit, click Cancel. D-Link DPR-2000 - User Manual...

  • Page 65: Advanced > User Access

    The User List displays all the users that you allow to access the Print Server. This list displayed in the section labeled AUTHORIZED USERS on the screen. Authorized users are listed in the PC Description field. Their computers’ Ethernet MAC addresses are listed in the MAC Address field. D-Link DPR-2000 - User Manual...

  • Page 66

    3. Click Add to add to the User List. To delete a user from the User List, do as follows: 1. In the User List, select the target user. 2. Click Delete to delete that user from the User List. D-Link DPR-2000 - User Manual...

  • Page 67

    4. If you clicked Apply Settings in step 4 and wish to have a test e-mail sent to the address or addresses that you specified in step 2, click Test, then check to see if you have received the test e-mail. E-mail Account Details D-Link DPR-2000 - User Manual...

  • Page 68

    2. Type in an time interval (in minute s) in the Check E-mail Interval field. 3. Click Apply Settings to enable this function, then re-boot the Print Server. To abort and exit, click C ancel. D-Link DPR-2000 - User Manual...

  • Page 69: Advanced > Snmp

    Your Print Server can belong to up to three SNMP communities. Th Access Right refers to the network administrator’s ability to change the Community Name. Do as follows to set a Community Name and Access Right: 4. For each Community Name, type in a name. D-Link DPR-2000 - User Manual...

  • Page 70: Maintenance > Password

    2. In the New Password field, type in a new password. 3. In the Confirm Password field, type in the new password again to confirm. Click Apply Settings to save the new password in the Print Server. To abort and exit without saving, click Cancel. D-Link DPR-2000 - User Manual...

  • Page 71: Maintenance > Save/restore Settings

    - Restore the factory default settings to your Print Server. To save the current settings in your Print Server to your computer’s disk drive, do as follows: 1. Next to Save Settings to Local Hard Drive, click Save. A dialog window will pop up: D-Link DPR-2000 - User Manual...

  • Page 72

    To restore the factory default settings to your Print Server, do as follows; 1. Next to Restore To Factory Default Settings, click Restore Dev 2. Reboot your Print Server by unplugging its power adapter cable and then plugg ing it in again. D-Link DPR-2000 - User Manual...

  • Page 73: Maintenance > Firmware Upgrade

    Browse to browse. 2. Click Upgrade. Your Print Server will start to load the new firmware to its flash memory. It is very important that you do not turn OFF the power of either the D-Link DPR-2000 - User Manual...

  • Page 74

    3. When the firmware uploading process is completed, you will be prompted in a pop-up window. Click Finish to complete and exit. 4. Reboot your Print Server by unplugging its power adapter cable and then pl ugging it in again. D-Link DPR-2000 - User Manual...

  • Page 75: Maintenance > Diagnostics

    . Click on a target printer to select. To select a number of printers, click on all the target printers . Click Print Test Page to start printing. If you have selected more than one printers, the test pages will be printed on all selected printers. D-Link DPR-2000 - User Manual...

  • Page 76: Status > Device Info

    The fields in this section display the information and status related to each printer. If no printer is connected to a printer port, the screen will indicate the status as Off line in the Printer Speed and Printer Status fields. D-Link DPR-2000 - User Manual...

  • Page 77: Status > Network

    This screen section shows your Print Server’s current TCP/IP settings, such as DHCP/BOOTP, UPnP, and Mac Bonjour/Rendezvous. These settings can be mad using the Advanced TCP/IP screens (refer to a preceding Advanced LAN section in this manual for details). D-Link DPR-2000 - User Manual...

  • Page 78

    LPR printing task, the four USB printer port printing task, the IPP printing task, and the FTP printing task. Microsoft Network Printing This screen section shows the status of printing tasks through Microsoft Windows. These tasks include the SMB (over NetBEUI) printing and the SMB (over NBT) rinting. D-Link DPR-2000 - User Manual...

  • Page 79: Status >wireless Status

    Using the Web Configurator Mac AppleTalk Printing This screen section shows the status of your printing tasks through Mac AppleTalk. STATUS >Wireless Status The Wireless Status screen displays the wireless network status of the Print Server. D-Link DPR-2000 - User Manual...

  • Page 80: Status >print Log

    The printing log displays rows of information pertaining to each au orized user. For each row, you have the MAC address of the user’s computer, his IP address, the ame of the user, the status of printing tasks and size of printing tasks. D-Link DPR-2000 - User Manual...

  • Page 81: Help

    Using the Web Configurator HELP The Help screen provides help on how to use the Print Server’s functions. This screen displays a list of function topics. Click on a top to display the help information: D-Link DPR-2000 - User Manual...

  • Page 82: Reboot

    Print Server’s settings, so the Print Server can apply the new settings. After you have pressed the Reboot button, the following message will appear: ait until the message disappears. Your Print Server should now begin to use its new settings. D-Link DPR-2000 - User Manual...

  • Page 83: Refresh Printer Status

    Using the Web Configurator Refresh Printer Status Click the printer in the left column to refresh the status of the printer. D-Link DPR-2000 - User Manual...

  • Page 84: Tcp/ip Printing For Windows Vista

    TCP/IP Printing for Windows Vista TCP/IP Printing for Windows Vista Go to Start Control Panel Printers. Click Add a printer. D-Link DPR-2000 User Manual...

  • Page 85

    TCP/IP Printing for Windows Vista Select the first option, Add a local printer, and then click Next. Select the second option, Create a new port, and highlight Standard TCP/IP Port from the pull-down menu. Click Next. D-Link DPR-2000 - User Manual...

  • Page 86

    In the Hostname or IP address field, type the IP address of the Print Server (e.g. 10.62.31.15), this address can be found in the PRINTER SERVER STATUS screen of the Print Server’s web configurator. The Port Name field will automatically fill in. Click Next. D-Link DPR-2000 - User Manual...

  • Page 87

    In the next screen highlight the printer you wish to add. If the printer not on the list, click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers. Click Next D-Link DPR-2000 - User Manual...

  • Page 88

    TCP/IP Printing for Windows Vista Click Next to start installing the printer. After clicking Print a test page, a small dialogue box will display as below. Click Close. D-Link DPR-2000 - User Manual...

  • Page 89

    TCP/IP Printing for Windows Vista Click Finish. The printer is now ready for use. D-Link DPR-2000 - User Manual...

  • Page 90

    TCP/IP Printing for Windows Vista D-Link DPR-2000 - User Manual...

  • Page 91: Tcp/ip Printing For Windows Xp

    TCP/IP Printing for Windows XP Go to Start Printers and Faxes Add a Printer. When the following screen displays, click Next. Select the first option, Local printer attached to this computer, and click Next. D-Link DPR-2000 User Manual D-Link DPR-2000 User Manual...

  • Page 92

    TCP/IP Printing for Windows XP Click the second option, Create a new port, and select Standard TCP/IP Port from the drop-down list box. Click Next. Click Next. D-Link DPR-2000 - User Manual...

  • Page 93

    In the Hostname or IP address field, type the IP address of the Print Server (e.g. 10.62.31.15). This address can be found in the PRINTER SERVER STATUS screen of the Print Server’s web configurato r. The Port Name field will be automatically filled in. Click Next. D-Link DPR-2000 - User Manual...

  • Page 94

    TCP/IP Printing for Windows XP Select Custom and click Settings. D-Link DPR-2000 - User Manual...

  • Page 95

    TCP/IP Printing for Windows XP The following screen will be displayed. Select LPR from the Protocol field. Enter the Queue Name, which can be found in the PRINTER STATUS screen of the Print Server’s web configurator. Click OK. D-Link DPR-2000 - User Manual...

  • Page 96

    TCP/IP Printing for Windows XP TCP/IP Printing for Windows XP Click Next. Click Next. D-Link DPR-2000 - User Manual D-Link DPR-2000 - User Manual...

  • Page 97

    If the printer is not on the list, click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers. Click Next D-Link DPR-2000 - User Manual...

  • Page 98

    TCP/IP Printing for Windows XP At this screen, you can input a name for the printer, and then click Next. Select Yes to print a test page. Then click Next. Click Finish. The printer is now ready for use. D-Link DPR-2000 - User Manual...

  • Page 99

    TCP/IP Printing for Windows XP D-Link DPR-2000 - User Manual...

  • Page 100: Tcp/ip Printing For Windows 2000

    TCP/IP Printing for Windows 2000 Go to Start Settings Printers and Faxes Add a Printer. When the following screen shows up, click Next. Select the first option, Local printer, and click Next. D-Link DPR-2000 User Manual D-Link DPR-2000 User Manual...

  • Page 101

    Click Next if the New Printer Detection screen pops up. On the next screen, select the second option Create a new port and highlight Standard TCP/IP Port from the drop-down list. Click Next. Click Next. D-Link DPR-2000 - User Manual...

  • Page 102

    In the Hostname or IP address field, type the IP address of the Print Server (e.g. 10.62.31.15). This address can be found in the PRINTER SERVER STATUS sc reen of the Print Server’s web configurator. The Port Name field w ill be filled in automatically. Click Next. D-Link DPR-2000 - User Manual...

  • Page 103

    TCP/IP Printing for Windows 2000 Select Custom and click Settings. D-Link DPR-2000 - User Manual...

  • Page 104

    TCP/IP Printing for Windows 2000 The following screen will display, select LPR from the Protocol field. Enter the Queue Name, which can be found in the PRINTER STATUS screen of the Print Server’s web configurator. Click OK. D-Link DPR-2000 - User Manual...

  • Page 105

    TCP/IP Printing for Windows 2000 Click Next. D-Link DPR-2000 - User Manual...

  • Page 106

    In the next screen highlight the printer you wish to add. If the printer i s not on the li lick [Have Disk] and insert the printer driver disk that came with your printer to install the pr inter drivers. Click Next D-Link DPR-2000 - User Manual...

  • Page 107

    At this screen, input a name for the printer, and then click Next >. elect the first option, Do not share this printer. Then click Next. Select Yes to print a test page, click Next. D-Link DPR-2000 - User Manual...

  • Page 108

    TCP/IP Printing for Windows 2000 Click Finish. The printer is now ready for printing with Windows 2000 on your network. D-Link DPR-2000 - User Manual...

  • Page 109: Tcp/ip Printing For Windows 98se/me

    TCP/IP Printing for Windows 98SE/ME TCP/IP Printing for Windows 98SE/ME Go to Start Control Panel. Double click on Network, and then click Settings Add. D-Link DPR-2000 User Manual...

  • Page 110

    TCP/IP Printing for Windows 98SE/ME Highlight Client and click Add. At this screen, click Have Disk. D-Link DPR-2000 - User Manual...

  • Page 111

    TCP/IP Printing for Windows 98SE/ME 1. Insert the DPR-2000 CD into your CD-ROM drive. Select the CD’s drive letter from the drop-down box. 2. Double-click on the folder lpr. 3. Select lpr.inf to highlight it. 4. Click OK. Click OK to confirm the location of the file.

  • Page 112

    TCP/IP Printing for Windows 98SE/ME You should now be back to the Network Properties Page. Highlight LPR for TCP/ Printing and click Proper ties. Click Add Port. D-Link DPR-2000 - User Manual...

  • Page 113

    Type in the IP address and Port Name of the Print Server, this information can be found in the PRINTER SERVER STATUS and PRINTER STATUS screens of the Print Server’s Web configurator. Click OK. NOTE: The IP Address and Port Name here are just examples only. D-Link DPR-2000 - User Manual...

  • Page 114

    TCP/IP Printing for Windows 98SE/ME The IP Address and Port Name will be displayed in the following screen (the IP address and port name in the screen above are for example only). Click OK. Click OK. D-Link DPR-2000 - User Manual...

  • Page 115

    TCP/IP Printing for Windows 98SE/ME Windows will ask to restart. Click Yes. Once your computer has rebooted, click on Start Settings Printers Printer. When the Add Printer Wizard screen appears, click Next. Select Network Printer and click Next. D-Link DPR-2000 - User Manual...

  • Page 116

    TCP/IP Printing for Windows 98SE/ME Type in the path if you know it; otherwise, click Browse. From the following screen, browse for the printer port and highlight the port (e.g. dlink-1D6FA3 in this manual). Click OK. D-Link DPR-2000 - User Manual...

  • Page 117

    If the network path is not specified, type in the IP Address and Port Name of the Print Server (like in the example below). Select Yes or No to enable or disable printing from MS-DOS based programs. Click Next. D-Link DPR-2000 - User Manual...

  • Page 118

    In the next screen highlight the printer you wish to add. If the printer is not on the list, click [Have Disk] and insert the printer driver disk that came with your printer to install the printer drivers. Click Next D-Link DPR-2000 - User Manual...

  • Page 119

    TCP/IP Printing for Windows 98SE/ME TCP/IP Printing for Windows 98SE/ME lick Next. Select Yes to print a test page. Click Finish. D-Link DPR-2000 - User Manual D-Link DPR-2000 - User Manual...

  • Page 120

    TCP/IP Printing for Windows 98SE/ME To check whether the printer is installed, go to Start Settings Printers. D-Link DPR-2000 - User Manual...

  • Page 121: Unix/linux Printing

    For example, you could define a printer hp5l that prints to port PS-142634-P1, and a printer hp5lt that prints to port PS-142634-P1_TEXT. Your graphics files could then be printed to the hp5l printer, and “raw” text files could be printed to the hp5lt printer. D-Link DPR-2000 User Manual...

  • Page 122: Printing From Bsd Unix Versions

    ◊ On BSD/OS, FreeBSD, or NetBSD systems, create the directory as subdirectory of /var/spool. 4. Change the owner and permissions of the directory so that it is owned and writable by group daemon, using the following commands: D-Link DPR-2000 - User Manual...

  • Page 123

    | (a vertical bar). The entri es used above are: ◆ lp= The lp entry is used to specify a local printer device. Since the printer is a remote printer, this entry should be blank. D-Link DPR-2000 - User Manual...

  • Page 124

    The host where the remote printer is located, in this case ◆ =address D-Link print server. ◆ rp=printer The name of the printer o n the remote host. For the D-Link print server, the port nam e should be used. Note: this entry is case-sensitive. D-Link DPR-2000 - User Manual...

  • Page 125: Printing From Sco Unix System V/386

    Setting up Printing in Mac OS X Tiger (10.4.9) Printing From SCO Unix System V/386 To allow printing to a printer attached to your D-LINK network print server from a SCO Unix System V/386 hos 1. Login as the superuser (root).

  • Page 126

    Please enter the name of the remote host that printer is attached then enter the address of the D-Link print server. You can use the name you added to /etc/host in the step above. Confirm that your entries are correct.

  • Page 127: Printing From Solaris

    8. Optionally repeat the addition to add another printer for printing text files, with_TEXT appended to the port name. Once you have added the new printer, you can use the lp command to print files to the printer. Consult your Solaris documentation for details. D-Link DPR-2000 - User Manual...

  • Page 128: Printing From Red Hat Linux

    . Note that to use the Printer configuration tool you must have root privileges, and to start the application you may also type the comm and: “re dhat-config-printer”. 4. Click the New button in the Printer configuration tool menu. D-Link DPR-2000 - User Manual...

  • Page 129

    The printer name may contain letters, numbers, dashes (-), and underscores (_). Optionally, enter a short description for the printer, which can contain spaces. Then click Forward to enter Queue type window. D-Link DPR-2000 - User Manual...

  • Page 130

    IP address of the print server to which the printer is attached in the Server field, and type the port name in Queue field. Click Forward to select the type of p rinter. 8. Select the printer model. D-Link DPR-2000 - User Manual...

  • Page 131

    10. Print a test page to make sure the printer is functioning properly. To print a test page, select the printer from the printer list, then select the appropriate test page from the Test menu. D-Link DPR-2000 - User Manual...

  • Page 132: Setting Up Printing In Mac Os X Tiger (10.4.9)

    Select the Apple Talk tab in the Network menu. Check the box labeled Make Apple Talk Active. Click on the Apply Now button and close the menu. Apple Talk is now active on the system. Now a printer can be added. D-Link DPR-2000 - User Manual...

  • Page 133: Adding A Printer

    Setting up Printing in Mac OS X Tiger (10.4.9) Adding a Printer Use the Go menu at the top tool bar and open the Utilities folder. D-Link DPR-2000 - User Manual...

  • Page 134

    Setting up Printing in Mac OS X Tiger (10.4.9) In the Utilities folder, find and select to see the Printer List dialog window. Click Add button to open the Printer Browser screen. Mac OS X Tiger (10.4) supports five printing protocols: 1. AppleTalk D-Link DPR-2000 - User Manual...

  • Page 135

    To add an Internet Printing Protocol, Line Printer Daemon or HP Jet Direct – Socket enabled printer, click on the button and follow the instructions to add an IP Printer in the “Adding an IP printer” section. D-Link DPR-2000 - User Manual...

  • Page 136: Appletalk-enabled Or Bonjour-enabled Printers

    By default the Printer Browser will use Auto Select for Print sing. This may also be manually selected in the Print Using drop-down list box by rand and model. Click the Add button to exit the Printer Browser window and plement the new setting. D-Link DPR-2000 - User Manual...

  • Page 137

    The printer that has just been added will show up in the Printer List menu, it might take a few seconds depending on network conditions. When the printer appears it i ready for use. Quit the Printer Setup Utility and start printing. D-Link DPR-2000 - User Manual...

  • Page 138: Adding An Ip Printer

    The Printer Browser will indicate that it is verifying the address. If the printer is found, the Printer Browser will state “Valid and complete address” in the Address field. The printer utility is able to detect the printer and may automatically sele the D-Link DPR-2000 - User Manual...

  • Page 139

    The setup procedures for these three printing protocols (Internet Printing Pro tocol (IPP), Line Printer Daemon (LPD), and HP Jet Direct – Socket) are ess entially the same. Illustrated examples are included below as a reference. D-Link DPR-2000 - User Manual...

  • Page 140

    1. Enter the IP address of the print server to which the printer is attached in the Address field. After that, type if the print server’s “: 80” “: second port” second port is enabled. 2. Type the port name in the Queue field. D-Link DPR-2000 - User Manual...

  • Page 141

    1. Enter the IP address o f the print server to which the printer is attached in the Address field. After that, type “: 9100” for the USB port. 2. Keep the Queue field blank. D-Link DPR-2000 - User Manual...

  • Page 142

    Setting up Printing in Mac OS X Tiger (10.4.9) Click the Add button after completing the selection of the printer model in the Print Using drop-down menu. When th e Installable Options pop-up window appears, click the Continue button. D-Link DPR-2000 - User Manual...

  • Page 143

    The printer that has just been added will show up in the Printer List menu, it might take a few seconds depending on network conditions. When the printer appears it is ready for use. Quit the Printer Setup Utility and start printing. D-Link DPR-2000 - User Manual...

  • Page 144: Setting Up Appletalk Printing In Mac Os 9

    ADVANCED tab, click the Advanced LAN button and then scroll to the bottom to the AppleTalk protocol section If your AppleTalk network is divided into AppleTalk zones, you will have to specify which zone the Print Server should be in. You should locate the Print Server in the D-Link DPR-2000 User Manual...

  • Page 145

    Chooser Name: This field displays the print server's port name. Printer Type: Enter the printer type in this field. PostScript Level: Select either Level 1 or Level 2 from the drop-down menu. Font Group: Select the Font Group from the drop-down menu. D-Link DPR-2000 - User Manual...

  • Page 146

    Double-click the name of the Printer Port you wish to use. The Printer Ports shown are examples only. you have not previously set this printer as the d efault, your computer will prompt u for a PostScript Printer Description file. Choose Select PPD. D-Link DPR-2000 - User Manual...

  • Page 147

    If you wish to access this setting in the future, you can use the Setup button in the Chooser window. The selected printer will become your computer‘s default printer. You may need to choose Page Setup in any applications you have open. D-Link DPR-2000 - User Manual...

  • Page 148: Wireless Basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products allow you to access the data you want, when and where you want. You will be able to enjoy the freedom that wireless networking brings.

  • Page 149

    Wireless network devices are as competitively priced as conventional Ethernet network devices. Standards-Based Technology Based on the IEEE 802.11g standard, the DPR-2000 is interoperable with existing compatible 2.4GHz wireless technology with data transfer speeds of up to 54Mbps when used with other D-L ink devices.

  • Page 150: Wireless Installation Considerations

    The key to maximize wireless range is to follow these b asic guidelines: 1. Keep the number of walls and ceilings between the DPR-2000 and other netwo devices to a minim um. Each wall or ceiling can reduce your D-Link wireless products range from 3-90 feet (1-30 meters).

  • Page 151

    Setting up AppleTalk Printing in Mac OS 9 appliances that generate extreme RF noise. D-Link DPR-2000 - User Manual...

  • Page 152: Wps (wi-fi Protected Setup)

    Wi-Fi certified 802.11 products including access points, wireless adapters, Wi-Fi phones, and any other consumer electronics devices. For DPR-2000, WPS can be enabled by way of PBC (Push button configuration) method, in which users simply need to push a WPS button on both WPS devices to connect.

  • Page 153: Technical Specifications

    135 (W) x 27 (H) x 97 (D) mm (5.31 x 1.06 x 3.82 inches) Dimensions: Operating Temperature: 0 to 40°C (32 to104°F) Storage Temperature: -25 to 55°C (-13 to 131°F) Humidity: 5% to 95% non-condensing D-Link DPR-2000 User Manual...

  • Page 154

    Setting up AppleTalk Printing in Mac OS 9 Emission Certification: FCC Class B, CE Class B, VCCI Class B, C-Tick D-Link DPR-2000 - User Manual...

  • Page 155: Appendix: Dpr-2000 Printer Compatibility List

    Appendix: DPR-2000 Printer Compatibility List Appendix: DPR-2000 Printer Compatibility List Printers Supported on Windows 2000 SP4 and Windows XP Printer List Results (*Y=Pass, N=Fail, N/A=Non-available function) Model Printing Scan Manufacturer Avision MF3100L Benq CM3000 Brother MFC-210C Brother MFC-420CN Brother MFC-3240C...

  • Page 156

    Appendix: DPR-2000 Printer Compatibility List Dell Photo 926 Dell Photo 966 EPSON PM-A970 EPSON PM-A920 EPSON PM-A820 EPSON PM-A720 EPSON PM-A950 EPSON PM-A890 EPSON PM-A750 EPSON PM-A650 EPSON STYLUS CX2 EPSON Stylus CX37 EPSON Stylus CX3900 EPSON Stylus CX4100 EPSON...

  • Page 157

    Appendix: DPR-2000 Printer Compatibility List PSC1315 Photosmart C1350 Photosmart C1610 Photosmart C3180 Photosmart C4180 Photosmart C5180 OfficeJet 4255 OfficeJet 4355 OfficeJet 5510 OfficeJet 5610 OfficeJet 6110 OfficeJet 7210 LaserJet 3050 Lexmark x3470 Lexmark x5470 Samsung SCX-4100 Samsung SCX-4200 D-Link DPR-2000 - User Manual...

  • Page 158

    Appendix: DPR-2000 Printer Compatibility List Printers Supported on Windo ws Vista 32 -bit Printer List Results (*Y=Pass, N=Fail , N/ A=Non-avai lable f unction) Printing Scan Model Manufacturer Avision MF3100L iver not available Benq CM3000 Brother MFC-210C Brother MFC-420CN Brother...

  • Page 159

    Appendix: DPR-2000 Printer Compatibility List EPSON PM-A970 EPSON PM-A920 EPSON PM-A820 EPSON PM-A72 EPSON PM-A950 EPSO PM-A890 EPSON PM-A750 EPSON PM-A650 EPSON Stylus CX290 EPSON Stylus CX37 EPSON Stylus CX3900 EPSON Stylus CX4100 EPSON Stylus CX4700 EPSON Stylus CX4900 EPSON...

  • Page 160

    Appendix: DPR-2000 Printer Compatibility List Photosmart C1610 Photosmart C3180 Photosmart C4180 Photosmart C5180 LaserJet 3050 Drive r not availa Lexmark x3470 Lexmark x5470 Samsung SCX-4100 Samsung SCX-4200 ther rinters fr om th e brands listed above may also be supported.

Comments to this Manuals

Symbols: 0
Latest comments: