D-Link DPR-1040 Manual page 7

Introduction
manufacturer drivers without creating a physical USB connection from your printer to
your computer. After the software provided by your printer's manufacturer is installed,
using the printer's scan and fax functions will be exactly the same as how it's
described in your printer's manual.
The DPR-1040 is compatible with the following major network operating systems:

TCP/IP
UNIX lpr/lpd (HP-UX, SunOS, Solaris, SCO, UnixWare, IBM AIX) Windows NT/2000,
Windows 98SE/ME, Windows XP/Vista, NetWare 5.x NDPS LPR Remote Printing
MacOS X (LPR/IPP protocols)
The PS software - PS Link, allows further configuration of the MFP server:
 PS-Link －Use this to enable your computer to use your printer's
print/scan/fax/copy functions and GDI printing. PS-Link helps you to install your
printer's manufacturer drivers without creating a physical USB connection from your
printer to your computer. For more information see the "Using The PS Software"
Chapter.
D-Link DPR-1040 User Manual 3