Installing And Starting The Ps Admin Program; Before Install Ps Admin Program; Installing Ps Admin Program - D-Link DP-313 Quick Installation Manual

8. Plug the AC power adapter into an AC power outlet. This will supply power to the
Wireless Print Server. The Wireless Print Server Self-Test (POST) routines will
proceed automatically.

Installing and starting the PS Admin program

PS Admin program can be conveniently used to configure and manage your print server
from any personal computer running the Windows operating systems. Once the print
server is configured, you can use it for printing from any network environment.
NOTE: If you use only the TCP/IP (U
Windows system, you can use the telnet interface to configure your print server (the
default IP of print server is 192.168.0.1, the subnet mask is 255.255.255.0 ).
You can also use the web based management utility by setting your browser to
http://192.168.0.1 See the web based user guide for details.
Before installing PS Admin
You need to have and NetBuei and TCP/IP network protocol enabled. PS Admin uses
TCP/IP protocol for communicating with the print server.

Installing PS Admin program

Follow the procedure outlined below to install PS Admin:
1. Insert the Print Server installation CD
2. Click Install PS Admin Program
3. An instruction menu will appear and follow it step by step to complete the
installation process
Once the installation is complete, you can begin using PS Admin.
) and/or AppleTalk protocols and don't have a
NIX