D-Link DPR-1040 Manual page 42

Using PS Software
2. The program will prompt you again to connect the two devices, click No and
continue with the rest of the installation.
3. After the installation of the MFP/GDI printer CD has finished, you may use
PS-Link to complete the physical connection between the MFP/GDI printer and your
computer.
Click the [Link] button of the PS-Link window as below.
When the connection is successful, a message will display. Press OK to exit.
4. Now the MFP/GDI printer is ready to use through your computer.
D-Link DPR-1040 User Manual 38