Dell UP2414Q User Manual page 57

The media has
been ejected
during writing or
erasing.
Despite the dis-
appearance
of the pop-up
window, the
media has been
ejected while the
LED was blinking.
Cannot format
or write on the
media.
Card reader is not
working
Displays the error
message, "Error
copying file or
folder."
Displays the error
message, "Cannot
write folder (folder
name) or file (file
name)," during
writing, or, "Cannot
remove folder (folder
name) or file (file
name),". While eras-
ing, you cannot write
or erase in the same
folder or file name.
Although the pop-up
window disappears
during writing, if you
eject your media
while the LED is still
blinking, then you
cannot complete
your action on the
media.
Write-protect switch
is enabled.
USB interface is not
working.
• Reinsert the media and write or
erase again.
• Format the media for writing or
erasing the same folder or file
name.
• Format the media for writing or
erasing the same folder or file
name.
• Verify that the write-protect
switch of the media is
unlocked.
• Check that your monitor is
powered On.
• Reconnect the upstream cable
from your computer to the
monitor.
• Reinsert the media.
• Switch Off and then turn On
the monitor again.
• Reboot the computer.
Troubleshooting 57
