Fuse Replacement - Honda BF45A Owner's Manual

Honda power equipment outboard motor owner's manual
Hide thumbs Also See for BF45A:
Table of Contents

Advertisement

10. MAINTENANCE
FUEL TANK HOSE
CONNECTOR
FUEL TANK
FILTER
Fuel Tank Filter
Cleaning/Replacement
1. Turn the fuel tank hose connector
counterclockwise to remove the
fuel tank filter.
2. Clean the fuel tank filter with non-
flammable cleaner or solvent.
Replace the fuel tank filter if neces-
sary.
3. After cleaning or replacement, rein-
stall the fuel tank filter and fuel
tank hose connector securely.
Fuse Replacement
BLOWN FUSE
If the fuse is
blown, running the engine
will not charge the battery and the
electric starter will not work.
RUSE RATING: 15A
Never use a fuse with a different rat-
ing from that specified.
If the fuse is blown, check the cause,
then replace the fuse with a spare fuse
of the same rated capacity. Unless the
cause is found, the fuse may blow
again.
FUSE COVER
Replacement
1. Stop the engine.
2. Remove the engine cover.
3. Pull the blown fuse out of the clip.
4. Rush a new 15A fuse into the clip.
A spare 15A fuse is located in the fuse
holder. If the spare fuse is not available,
the motor will need to be started with the
pull starter rope (refer to the emergency
start procedure page 43).
89

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents