Starting The Engine (Remote Control Type) - Honda BF45A Owner's Manual

5. STARTING THE ENGINE (REMQTE CONTROL TYPE)
EMERGENCY
EhERGENCY S'i'OP
SWITCH CLIP
I NOTICEI The propeller must be
lowered into the water. Running the
outboard motor out of the water will
damage the water'pump and over-
heat the engine.
1. Engage the emergency stop switch
clip located at one end of the emer-
gency stop switch lanyard with the
emergency engine stop switch.
Attach the other end of the emer-
gency stop switch lanyard securely
to the operator.
- If the operator does
not attach the emergency stop
switch lanyard, and is thrown
from his seaQ or out of the boat,
the out-of-control boat can seri-
ously injure the operator, pas-
sengers, or bystanders. Always
properly attach the lanyard
before starting the motor.
The engine will not start unless the
emergency stop switch clip is engaged
with the emergency engine stop switch.
N
(neutralj
A spare emergency stop switch clip is
provided on the remote control box.
2.
Move the control lever to the N
(neutral) position.
The
engine will not start unless the
control lever is in the N (neutral)
position.
40