Honda GXV670 Owner's Manual page 30

4.Screw on the new oil filter by hand until the seal contacts the filter
mounting base, then use an oil filter wrench to tighten the filter an
additional 7/8 turn.
Oil filter tightening torque: 16 Ibf-ft (22 N - m
,
2.2 kgf-m).
5. Refill the crankcase with the specified amount of the recommended
oil (see page 28). Reinstall the oil filler cap/dipstick.
6. Start the engine, and check for leaks.
7. Stop the engine, and check the oil level as described on page 24. If
necessary, add oil to bring the oil level to the upper limit mark on t
dipstick.
27