Kenwood VR-6050 Instruction Manual page 22

Adjusting the sound
A SPEAKERS B TONE MULTI CONTROL
PHONE5 LdUDNESS A/V
MUiE VOLUME
CONTROL
MUTE
LOUDNESS
TONE
%,a II
)OOC,,,
7 ACTIVE EQ
SPEAKER EQ
VOLUME +I-
Joystick
(MULTI CONTROL
DOWN. /UP,)
BASS BOOST
A/V,
Adjusting the TONE
You can adlust the sound quality when the receiver IS in the PCM stereo
and analog stereo mode
0 Press the TONE key to select the TONE mode.
6 Use the MULTI CONTROL knob or Joystick (r/r) to select
0 When inTONEONselection,presstheTONE keyforthefollowing
displays.
BASS : Select this to adlust the low frequency range.
TREBLE:
Select this to adjust the htgh frequency range
0 Use the MULTI CONTROL knob or Joystick (r/Y) to adjust the
sound quality.
l
The bass and treble levels are adjustable from -10 to +I0 I" 2 step
Increments.
*The adjustment Item IS displayed for approximately 8 seconds
Once-touch low frequency emphasis (BASS BOOST)
(remote control only)
You can adlust the sound qualtty when the receiver IS in the PCM stereo
and analog stereo modes
Press the BASS BOOST key.
l
Press the key once to select the maxlmum (+lO) low frequency
emphasis setting.
l
This key does not function when the receiver IS II- the sound quality
or ambience effects adjustment mode
Switching back to the previous setting
Press the BASS BOOST key again.
Adjusting the LOUDNESS mode
You can adjust the Loudness function which controls the low volume
settings to malntaln the music's richness The adjustment can be made
when the receiver IS in the PCM stereo and analog stereo mode
Press the LOUDNESS key to turn the LOUDNESS setting ON.
To cancel
Press the LOUDNESS key again so that the "LOUDNESS"
indicator goes off.
22 EN
Muting the sound
The MUTE key lets you mute the sound of the speakers
Press the MUTE key.
\ \I/,
Blinks
To cancel
Press the MUTE key again so that the "MUTE" indicator goes off.
l
MUTE ON can also be deactivated by turning the VOLUME
CONTROL knob or pressfng VOLUME +/- keys
ACTIVE EQ mode
You can enjoy a lmore lmpresslve sound effect when ACTIVE EQ IS
tumed ON dilnng Dolby DIgItal and DTS playback and, when 111 PCM and
analog stereo mode
Press the ACTIVE EQ key for the following selections;
:
I ACTIVE EQ MUSIC : Effective whet? listening to rnllslc
(The ACTIVE EQ It?dlcatot Ilghts up I
2 ACTIVE EQ CINEMA : Effective whel-, watching a movie
(The ACTIVE EQ Indlcatol lights up )
3
ACTIVE EQ TV
: Effective when watching TV
(The ACTIVE EQ indicator lights up )
4
ACTIVE EQ OFF : The ACTIVE EQ function IS turned OFF
(The ACTIVE EQ lndlcatol goes off 1
l
"ACTIVE EQ" WIII scroll from right to left.
l
When ACTIVE EQ and SPEAKER ECI are OFF and ACTIVE EQ
iMUSIC IS turned ON, SPEAKER EQ (SMALL) will turn ON
automatlcally
*ACTIVE EQ functlon WIII not be available whe17 REC MODE, AUTO
TUN~NGO~PRESETMEMORYI~ON,~~~~~~~I-~~~~~H~LPCM~I~~~~~~
SPEAKER EQ mode
SPEAKER EQ's function vvlil automatically detect the vanol~s featiires of
each speaker and effectively creates a stereoscopic sound effect
Press the SPEAKER EQ key to switch the following setting;
:
1 SPEAKER EQ SMALL : To select a small xe speaker
(TheSPEAKER EQlnd~catorllghts~~p I
2 SPEAKER EQ NORMAL : To select an average size speaker
(The SPEAKER EQ Indicator lights up.!
3
SPEAKER EQ LARGE
: To select a large size speaker.
(TheSPEAKER EQ~ndlcatorllghtsup 1
4
SPEAKER EQ OFF
: The SPEAKER EQ functlot? IS turned
OFF
(The SPEAKER EQ Indlcatol goes off 1
l
"SPEAKER EQ" WI/I scroll from right to left
l
SPEAKER EQ cannot be turned OFF when ACTIVE EQ IS turned ON
l
SPEAKER EQ functlon WIII not be avallable when REC MODE, AUTO
TUNlNGorPRESETMEMORY1sON,anddurlng96kHzLPCMplayback
Listening with headphones
0 Press the A and B Speaker keys so that the speaker indicator
goes off.
Make sure the SPEAKERS
mdicators are turned off.
0 808
I ~~ ~~ .~ ~ ~._ ~~ ~~
l
If you turn off all of the speakers when in surround imode, the surround
[mode will be canceled as well, resulting II? stereo playback
0 Connect headphones to the PHONES jack.
0 Use the VOLUME CONTROL knob or VOLUME .+/-keys to
adjust the volume.