Digital Connections - Kenwood VR-6050 Instruction Manual

Setting up the system
Digital connections
The dIgItal in jacks can accept DTS, Dolby Dtgltal, or PCM signals. Connect components capable of outputtlng DTS, Dolby DIgItal, 01 standard PCM (CD)
format dIgItal signals
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" sectIon careftllly
- P
CD or DVD player
RF digital
Connect the video slgnal and analog
demodulator
(DEM-9991 D)
audio signals to the VIDEO 2
Jacks.
(sold separately)
(See "Connecting video components".)
- I/
DOLBY DIGITAL RF
OUT (AUDIO)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991Dl.
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 jack. (See "Connecting video components".)
12EN