Recelvlng Preset Statlons; Recelvlng Preset Statlons Ii? Order (P Call); Using The Rds Disp Idisplay) Key; (For The U K Only) - Kenwood VR-6050 Instruction Manual

Listening to radio broadcasts
Proceed to step El within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY key again).
fl Use the MULTI CONTROL knob or Joystick (r/r) to select
one of the station presets (I - 40).
q
Press the MEMORY key again to confirm the setting.
l
Repeat steps 0, 0, a, and
q
to store as many stations as
necessary
l
If you store a statjon at a previously used preset, the old statlon wll
be replaced by the new one
Receiving preset stations
Numeric keys
TUNER
q
Press the TUNER key to select tuner as the source.
q
Enter the number of the preset station you want to receive
(up to "40").
Press the numeric keys in the following order:
For "15", press
ml I IF
For "20". press
(+10(, (ml, 1x1
l
If you make a tnlstake entering a two digIt number, press the
+I0
key lepeatedly to return to the orIginal display and start again
_..~~ ~-~
-7
Receivjffg prmet st&ims in order
(P.CALL)
f-i
Joystick
(P.CALL I..
TUNER
hbl)
q
Press the TUNER key to select the tuner as the source.
H Use the Joystick to adjust the P.CALL
144/m
direction to
select the desired station.
. Each time you push the Joystick, another preset station IS received
tn order.
Pushing the Joystick to P.CALL ))I does the following:
r
01~02-'03-,...+...-'38+39+40
1
Pushing the Joystick to P.CALL I+ does the following:
Holding the Joystick on WI or 144 direction, lets you skip
through the presets, receiving each preset station at 0.5 second
intervals.
(For the U.K. only)
Using the RDS DISP (Display) key
RDS DISP
,TUNER
Pressing the RDS DISP key changes the contents of the
display.
Each press switches the display mode as follows :
c
I PS (Program Service name) display
2' RT iRadIo Text) display
2 Frequency display
0 PS (Program Service name) display :
The station name is displayed automatically when an RDS broadcast
IS received
If no PS data was sent, "NO PS" IS dlsplayed.
0 RT (Radio Text) display :
Text data accompanying the RDS broadcast scrolls across the display.
"NO RT" IS dlsplayed If the current RDS statjon does not provide RT
data.
0 Frequency display :
Displays the frequency of the current station
25 EN