4. Cabinet-R/L
1) Cabinet-R
Remove front 3 screws.
Remove rear 3 screws.
2) Cabinet-L
Remove front 3 screws.
Remove rear 3 screws.
5. Balance weight
1) Remove side 4 screws.
2) Lift the balance weight.
6. Door Assembly
1) Front Cover
Open the door.
Remove 4 screws(long Type, stainless).
Remove 6 screws(stainless).
Close the door slowly and remove front
cover downwards.
2) Control Panel Assembly
Open the door.
Remove 2 screws(stainless).
Remove wire connection.
Be sure the wiring should not be
changed in reassembling.
Remove 3 screws for Latch assembly
Remove 7 screws for Controller.
- 13 -