Option Display Part
Main Display Part
Latch Assembly
Controller
4. Balance weight
1) Remove side 4 screws.
2) Lift the balance weight.
5. Door Assembly
1) Front Cover
① Open the door.
② Remove 6 screws(stainless).
③ Close the door slowly and remove front
cover downwards.
2) Control Panel Assembly
① Open the door.
② Remove 8 screws(stainless).
③ Remove wire connection.
Be sure the wiring should not be
changed in reassembling.
④ Remove 5 screws for Controller.
⑤ Remove 3 screws for LED Supporter.
- 14 -