Installing The Unit - Kenwood DDX418 Instruction Manual

Installation/Removing the Unit

Installing the Unit

Bend the tabs of the mounting sleeve
with a screwdriver or similar utensil and
attach it in place.
⁄
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).
Installation on Toyota, Nissan or
Mitsubishi Car using Brackets
Accessory 3 (M5x6mm)
or Accessory 4 (M5x7mm)
Accessory 3 (M5x6mm)
or Accessory 4 (M5x7mm)
6
DDX418/DDX4048BT/DDX318/DDX3048
Installing the Escutcheon
Attach accessory 5 to the unit.
1
Removing the Escutcheon
1
Engage the catch pins on the removal tool
6 and remove the two locks on the lower
level. Lower the frame and pull it forward
as shown in the figure.
Car Bracket
⁄
• The frame can be removed from the top side in
the same manner.
2
When the lower level is removed, remove
the upper two locations.
Accessory 5
Accessory 6
Catch
Lock