Changing Flash Time - TIPTEL Ergophone XL1 User Manual

Base settings
2. Press the arrow keys to choose „4. BS Settings", then press the
SELECT soft key.
3. Enter the current base PIN and press the OK soft key.
4. Press the arrow keys to choose „4. Call Bar", then press the
SELECT soft key.
5. Press the arrow keys to choose the barring memory location, and
press the SELECT soft key.
6. Press the arrow keys to choose „ON" (barring enabled) or „OFF"
(barring disabled), then press the SELECT soft key.
7. If you select „ON", enter the number you want to restrict (up to four
digits) and then press the OK soft key.
8. Press the replace key to return to standby mode.
If you want to edit a stored nummer, please overwrite it.

Changing flash time

During a conversation, the FLASH soft key allows you to access the special services
offered by the telephone network or transfer a call to another extension when you
are connected to a PABX (Private Automatic Branch of eXchange). For details, see
par. „Flash signal" on page 19.
The default setting is 100 msec. If your FLASH key does not work properly, you
need to adjust the Flash time as follows:
1. Press the MENU soft key to display the main menu items.
2. Press the arrow keys to choose „4. BS Settings", then press the
SELECT soft key.
44