Setting The Date And Time - TIPTEL Ergophone 6110 User Manual

Setting the date and time

After switching on for the first time (and when the
battery is removed for longer periods), the tele-
phone automatically synchronises date and time
from the service provider network.
If your service provider does not support this func-
tionality, the date and time must be set manually.
To do this, press the left Display key under
"Menu", then keep pressing the "down arrow" key
until "Settings" is displayed. Then press the
key under "OK" three times to access "Set-
tings", then "Phone Settings", then "Time and Date".
Select "Set date" then "Set time", and use the key-
pad to enter the current date and time.
You can close the settings by repeatedly pressing
the key under "Back", and also by pressing the
red hang-up key once.
The correct date and time are then shown on the
display.
14