Televes Avant3 User Manual page 22

Launch Amplifier Avant3
How to use the programmer
MAIN MENU
**
FILT VHF
_ _
05 __
*
The channels set above channel 60, will
not appear in the output.
** The functions relating to programming
the VHF filter, as well as for powering
preamps through this input, do not apply
to this product.
PCT firmware
version
------------
V:x.xx
After connecting the programmer to the Avant3, it
sends the parameters with which it is configured
(input configuration, filter settings, ...). During this
process, the programmer displays its version of SW
Prodotto
for a while. The screen appears as follows:
firmware
versione:
V:x.xx
CT firmware
version
-----------
:x.xx
roduit
irmware
ersion:
:x.xx
INPUTS
U1 | U2
|
[2] |[3]
FILTER 1
(short press)
__
*
FILTER 5
__
PCT firmware
version
------------
V:x.xx
Unit
firmware
version:
V:x.xx
Only from
"Inputs" menu
(long press)
From any menu
(long press)
Saving
config...
PCT firmware
version
------------
V:x.xx
It then displays the SW version of the Avant3, also
briefly:
Produit
firmware
version:
V:x.xx
PCT firmware
version
------------
V:x.xx
Next, it will be displayed the main menu first
option.
Laitteen
ohjelmisto
versio:
V:x.xx
EXTENDED MENU
LANGUAGE
English
PCT firmware
version
------------
V:x.xx
Unit
firmware
version:
V:x.xx
22
PCT firmware
version
------------
V:x.xx
Laitteen
ohjelmisto
versio:
V:x.xx