Televes Avant3 User Manual page 21

LTE
The output level of every filter can be adjusted by
means of its corresponding attenuator.
Each filter features a LED for indicating either the
input signal level is the adequate one or that the AGC
is working correctly.
When mixing more units, the outputs will be
connected to the IN Mix.
LTE
PROGRAMMABLE AMPLIFIER
EUROPEAN TECHNOLOGY MADE IN EUROPE
IN Mix
Output
LTE LTE
Note that the last Avant3 will support the total
number of channels, ie, that all signals pass
through this amp. This will be taken into account
when setting the overall output level of the
installationby applying the power reduction:
V = V
DINB
OUT
being N= No. of channels
LTE
LTE
PROGRAMMABLE AMPLIFIER
EUROPEAN TECHNOLOGY MADE IN EUROPE
Output
IN Mix
- 7,5 log (N -1),
Universal programmer
The programer features 4 keys, and their functions
are the following:
(short press) - Selection of parameter
(positioning of the cursor).
- Modification of the parameter chosen by
the cursor (flashing)
(short press) - Change menu
(long press) - Change between Principal
and Extended menus
(long press) - Save changes to memory
+ + Increases the contrast of the screen.
+ + Decreases the contrast of the screen.
+ Cloning menu
21
EN