ECS NF650iSLIT-A Manual page 43

FSB & Memory Config (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-AwardBIOS CMOS Setup Utility
Parameters
Current CPU Freq, MHz
CPU Multiplier
FSB-Memory Clock Mode
x
FSB-Memory Ratio
x
FSB (QDR), MHz
Actual FSB (QDR), MHz 800.0
x
MEM (DDR), MHz
Actual MEM (DDR), MHz 666.7
Memory Timing Setting
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
FSB-Memory Ratio (Auto)
This item is used to set FSB and memory speed automatically.
Press <Esc> to return to the Advanced Chipset Features page.
Memory Timing Setting (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-AwardBIOS CMOS Setup Utility
Parameters
Memory Timing Setting
x tCL (CAS Latency)
x
tRCD
x
tRP
x
tRAS
x
Command Per Clock (CMD)[2 clock]
** Advanced Memory Settings **
x
tRRD
x tRC
x
tWR
x tWTR
x tREF
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
Memory Timing Setting (Optimal)
This item shows the current and target memory performance rates when the system
is undertaking the best performance.
Press <Esc> to return to the main menu setting page.
FSB & Memory Config
Item Help
Setting Current Value
Menu Level
3400.0 3400.0
System Clock mode
17 X 17X
[Auto]
[Auto]
Auto
Set FSB and memory
Auto 800.0
speed automatically.
Auto 666.7
[Linked]
Enter FSB Speed
[Press Enter]
manually. Memory Speed
changes
proportionally.
[Unlinked]
Enter FSB and memory
speed manually.
F6:Fail-Safe Defaults F7:Optimized Defaults
Memory Timing Setting
Setting Current Value
Menu Level
[Optimal]
Auto (5) 5 Select [Expert] to
Auto (5) 5 enter timings manually
Auto (5) 5
Auto (15) 15
Auto (3) 3
Auto (11) 20
Auto (4) 3
Auto (9) 9
Auto 3.9us
F6:Fail-Safe Defaults F7:Optimized Defaults
Using BIOS
Item Help
37