Table of Contents
Advertisement
6.
Gently hold the grip of the HDD, lift it up to release from its compartment.
7.
To install the new HDD, you will need to align the tabs on the drive bracket with the slots
on the bay. Press down gently on the drive bracket until it engages with the system. Do
not force the drive into place this can bend the pins on the hard drive.
8.
Slide the compartment cover into place and be sure the screw holes on the cover align
completely with the screw holes in the case.
9.
Secure the cover with the two screws.
93
Advertisement
Table of Contents
Need help?
Do you have a question about the Notebook computer and is the answer not in the manual?
Questions and answers