Pci/Plug And Play Setup Page - ECS Motherboard User Manual

Motherboard User's Guide
Power Management
Use this item to enable or disable a power management scheme. If you enable
power management, you can use the items below to set the power management
operation. Both APM and ACPI are supported.
Suspend Mode
This item shows the status S1(Stop Clock) when the system enters the power-
saving Suspend mode.
Suspend Time Out
This sets the timeout for Suspend mode in minutes. If the time selected passes
without any system activity, the computer will enter power-saving Suspend
mode.
Resume On RTC Alarm/Date/Hour/Minute/Second
The system can be turned off with a software command. If you enable this item,
the system can automatically resume at a fixed time based on the system's RTC
(realtime clock). Use the items below this one to set the date and time of the
wake-up alarm. You must use an ATX power supply in order to use this feature.
Keyboard Power On
If you enable this item, system can automatically resume by pressing hot key,
Power key or any key on the keyboard, or typing in the password. You must
use an ATX power supply in order to use this feature.
LAN/Ring Power On
The system can be turned off with a software command. If you enable this item,
the system can automatically resume if there is an incoming call on the Modem,
or traffic on the network adapter. You must use an ATX power supply in order
to use this feature.
PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the PCI bus and
those utilizing the system plug and play capability.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Primary Graphics Adapter PCI
Allocate IRQ to PCI VGA
PCI IDE BusMaster
: Move +/-/: Value Enter: Select F1: General Help Esc: Exit
F9: Optimized Settings
PCI / Plug and Play Setup
Help Item
Yes
Option
Disabled
PCI
AGP
F10: Save
22