Standard Cmos Setup Page - ECS Motherboard User Manual

Motherboard User's Guide
Some options on the main menu page lead to tables of items with installed values
that you can use cursor arrow keys to highlight one item, and press PgUp and
PgDn keys to cycle through alternative values of that item. The other options on
the main menu page lead to dialog boxes requiring your answer OK or Cancel by
selecting the [OK] or [Cancel].
If you have already changed the setup utility, press F10 to save those changes
and exit the utility. Press F1 to display a screen describing all key functions.
Press F9 to install the setup utility with a set of default values.

Standard CMOS Setup Page

This page displays a table of items defining basic information about your
system.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
System Time
System Date
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Floppy A
Floppy B
: Move +/-/: Value Enter: Select F1: General Help Esc: Exit
F9: Optimized Settings
System Time & System Date
These items set up system date and time.
Primary IDE Master/Primary IDE Slave/Secondary IDE Master/Secondary
IDE Slave
Use these items to configure devices connected to the Primary/Secondary IDE
channels. To configure an IDE hard disk drive, choose Auto. If the Auto setting
fails to find a hard disk drive, set it to User, and then fill in the hard disk
characteristics (Size, Cyls, etc.) manually. If you have a CD-ROM drive, select
the setting CDROM. If you have an ATAPI device with removable media (e.g. a
ZIP drive or an LS-120), select Floptical.
Floppy A/B
These items set up size and capacity of the floppy diskette drive(s) installed in
the system.
Standard CMOS Setup
00:004:12
Help Item
Mon 04/05/2004
Not Detected User [Enter], [TAB] or [SHIFT-TAB] to
Not Detected select a field.
Not Detected Use [+] or [-] to configure system
Not Detected time.
1.44 MB 3 1/2
Disabled
F10: Save
18