Power Management Setup Page - ECS Motherboard User Manual

Parallel Port Mode
Use this item to set the parallel port mode. You can select ECP (Extended
Capabilities Port).
ECP Mode DMA Channel
Use this item to assign a DMA channel to the parallel port.
Parallel Port IRQ
Use this item to assign IRQ to the parallel port.
OnBoard PCI IDE Controller
Use this item to enable or disable both of the onboard Primary and Second-
ary IDE channels.
Audio Device
This item enables or disables the AC'97 audio chip.
Modem Device
This item enables or disables the onboard Modem.
Ethernet Device
This item enables or disables the onboard Ethernet LAN.
OnBoard USB Function
Enable this item if you plan to use the USB ports on this motherboard.
USB Function For DOS
Enable this item if you plan to use the USB ports on this motherboard in a
DOS environment.

Power Management Setup Page

This page sets some parameters for system power management operation.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
ACPI Aware O/S
Power Management
Suspend Mode
Suspend Time Out
Resume On RTC Alarm
Keyboard Power On
LAN/Ring Power On
: Move +/-/: Value Enter: Select F1: General Help Esc: Exit
F9: Optimized Settings
ACPI Aware O/S
This item supports ACPI (Advanced Configuration and Power management
Interface). Use this item to enable or disable the ACPI feature.
Chapter 3: BIOS Setup Utility
Power Management Setup
Yes
Help Item
Enabled
S1 Enable / Disable
Disabled ACPI support for
Disabled Operating System.
Disabled Enable: If OS supports
Disabled ACPI.
Disable: If OS does not
support ACPI.
F10: Save
21