. Spark plug service
Recommended spark plug: BPGES, BPRGES (NGK)
W20EP-U, W20EPR-U (ND)
To ensure proper engine operation, the spark plug must be properly gapped
and free of deposits.
1. Remove the spark plug cap.
2. Clean any dirt from around the spark plug base.
3. Use the wrench supplied in the tool kit to remove the spark plug.
PLUG CAP
4. Visually
inspect the spark plug. Discard it, if the insulator is cracked or
chipped. Clean the spark plug with a wire brush if it is to be reused.
5. Measure the plug gap with a feeler gauge.
The gap should be 0.7-0.8
mm (0.028-0.031
in).Correct
as necessary by
carefully bending the side electrode.
0.7-0.8
mm
(0.028-0.0
31 in)
21