V-fit Air Elliptical Trainer Assembly & User Manual page 19

3
Note
The Pedal Hinge Bolts are stamped
with L or R on the head of the bolt
for Left and Right.
4
Note
The Footplates are fitted with the
raised edge on the inside.
Assembly
Attach the rear of the Right Hand Footplate Support Bar (6R) to the
Crank (27) by Screwing in clockwise 1 x Right Hand Pedal Hinge Bolt (60)
and 1 x Wave Washer (59). Secure with 1 x 1/2" Spring Washer (51) and
1 x 1/2" Nylon Locknut (48R).
Repeat for the left hand side, screwing in the Left Hand Pedal Hinge Bolt
& Nut (61 & 48L) anti-clockwise.
27
51
48
Attach the Footplates (11) to the Left and Right Footplate Support Bars
(6L & R) using 2 x M10 x 45mm Hex Bolts (44) and 2 x M10 Nylon
Locknuts (45) for each Footplate.
Air Elliptical Trainer
REAR
59
60
6
45
FRONT
4
6R
FIG 3
11
44
FIG 4
Page 19