Fujitsu D2179 Tehnical Manual page 22

Connectors and jumpers
Settings inside front panel connector
Figure 4: Jumper settings
V
CAUTION!
Please pay attention to the exact position of the jumpers!
A inserted
B inserted
not inserted
C inserted
not inserted
22
A B
factory setting
The System BIOS executes from floppy drive A: and
the inserted "Flash-BIOS-Diskette" restores the
System BIOS on the system board.
Normal operation (default setting).
System and BIOS Setup password are skipped when
the device is switched on and may be changed.
System and BIOS Setup password must be entered
when the device is switched on.
C
Features
D2179 (Econel 100)