Honda FL5540KO Operator's Manual page 17

FL5540 SUB-FRAME and COUNTERWEIGHT INSTALLATION/REMOVAL
8. Lift the front of the sub-frame and slip it
into the channel of the lower cover. Insert
two mounting pins (3/4 x 3.19in) from
inside sub-frame through frame lower
cover. Slip a 3/4in washer over each
mounting pin and insert the clip pins
through the holes.
NOTE: Mounting pins have a flat side that
must be pointing down.
9. Insert two mounting pins (3/4 x 3.19in)
from inside the bottom bracket through the
sub-frame. Slip a washer over each pin
and retain with a clip pin as shown.
NOTE: Mounting pins have a flat side that
must be pointing down.
16
MOUNTING PIN
FLAT SIDE DOWN