Honda FL5540K1 Operator's Manual page 41

LOADER STAND REMOVAL
7 . Raise the loader with the loader control
until the stands clear the ground.
Remove fixing pin from the stands and
8.
remove the stands.
Align the hole in the bottom of the stand
9.
with the mounting hook at rear of
mainframe. Slide the stand over the
mounting hook and then insert the fixing
pin previously removed through main
frame and through the stand. Repeat the
above steps for the other side. Lower the
loader to the ground.
Front Loader is ready for operational check.
(Page 25)
LOADER INSTALLATION
39