Table of Contents
Advertisement
'RACTOR PREPARATION
HARDWARE BAG CONTENTS
QNT'Y
DESCRIPTION
5
30mm hex hd capscrew
2
x
12mm x
2
hex hd capscrew
2
ga. machine bushing
12
16
0
hex hd capscrew
2
flat washer
2
hex hd capscrew
2
The tractor must be equipped with the optional RLK5000 LIFT KIT and RWB5000 REAR
WEIGHT BOX which are sold separately.
DO NOT EXCEED THE RATING FOR MAXIMUM GROSS VEHICLE WEIGHT.
REFER TO OWNER'S MANUAL PROVIDED WITH TRACTOR.
The use of adequate rear counterweight is required for proper loader stability and provides
better traction and easier, more efficient loader operation.
Refer to Tractor Owner's Manual and RWB5000 Weight Box Installation Instructions for specific
recommendations on counterweighting tractor.
or may require more carefully restricted operation at the rated load.
ROLL-OVER PROTECTION STRUCTURE (ROPS) SYSTEM
ROPS
The tractor
system must be in place and used properly to ensure adequate operator
protection.
LOADER HYDRAULIC SYSTEM
Follow recommendations in this operator's manual for hydraulic fluid specifications.
TRACTOR TIRES
Selection of tires should be restricted to tire recommendations as specified by your
Tractor owner's manual. Ag tires are recommended when using the front loader
TIRE INFLATION
Front tires must be maintained at the maximum recommended inflation with the added weight
of loader and material. Ag Tire pressure
Rear tires must be maintained at equal pressure within the recommended tire inflation range.
Ag Tire pressure 24 psi.
10
TRACTOR PREPARATION
specific conditions may not permit safe use of loader at loader rating
psi.
34
hex nut
2
2
lockwasher
hex
4
nut
flat washer
6
washer
lock
4
hex hd capscrews
8 x 1 "
4
lockwasher
2
hex hd capscrew
2
flatwasher
2
5/16"
hose clamp
2
nylon tie
1
Advertisement
Table of Contents
