Table of Contents
Advertisement
2. Setting Up Your Phone
To delete a name assigned to a PSD number
Notes:
• This task requires a display phone.
• You need to know the PSD bin number for the PSD number in order to delete
an assigned name. To check the bin number for a key, see "Checking Speed
Dial Numbers" on page 36.
Pick up the handset or press the ON/OFF key.
1.
Press the PROG key.
2.
Press the * key.
3.
Enter 0 for the Name Assignment mode.
4.
Press the
VOLUME
5.
displayed.
Press the FL/R key to clear the current/default data.
6.
Press the HOLD key.
7.
Notes:
• It is strongly recommended that you assign the PSD bin number as a name for
the key at this point so that it will appear on the display for future use. The bin
number should be entered in the following format: "-PSDxx (or xxx)" where
xx or xxx = the actual bin number. Example: "-PSD901". For more
information, see "Assigning and Deleting Names for PSD Numbers" on page
26.
•
If using a large-display phone, press the MENU key, then the key to the left
! # #
of
30
key until the desired PSD bin number (80-99) is
to have the change reflected on the display.
Key Telephone User Guide
Advertisement
Table of Contents
