Assembly Instructions - Stamina 55-1529A Owner's Manual

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: parts@staminaproducts.com
R
The bracket
needs to
point
toward
the footrest.
STEP 1
BASE ASSEMBLY
Unfold the
FRAME(2).
Then push down on the middle of the two
locked down.
STEP 2
"L"
There is a decal on the
Slide the bottom of the
MAIN FRAME(4).
PIVOT ARMS(5, 6)
to lock the
BUTTON HEAD BOLTS(M6 x 8mm)(54)
STEP 3
MAIN FRAME(4)
Attach the
ARMS(5, 6)
into the slots on the
BOLTS(M8 x 15mm)(45), WASHERS(M8)(51), LARGE WASHERS(M8)(52),
screwing the
NYLOCK NUTS(M8)(49)
L
The bracket needs to
point toward the footrest.
to an upright position by moving the
LEFT PIVOT ARM(5),
LEFT RIGHT PIVOT ARMS(5, 6)
and
Align the hole on the arm with the peg on the bracket, and insert the peg into the hole
in position. Then secure the
REAR FRAME(2)
onto the
REAR FRAME(2)
onto the brackets on the
FOLDING LINKAGES(3)
"R"
and a decal on the
into the brackets located at each side of the
PIVOT ARMS(5, 6)
LARGE WASHERS(M6)(53).
and
by sliding the slots in the ends of the
. Secure the
REAR FRAME(2).
6
FRONT FRAME(1)
RIGHT PIVOT ARM(6).
PIVOT ARMS(5, 6)
REAR
away from
until they are fully
on the pegs with
PIVOT
in the slots by
and