Emerson VSG Manual page 46

Single screw bare shaft compressor
Hide thumbs Also See for VSG:
Table of Contents

Advertisement

shoulder on the input shaft. Make sure the seal
is seated against the shoulder. If the seal is not
fully seated against the shoulder, the shaft seal
carbon will be damaged when the seal cover is
installed.
Maintenance Suggestion:
A spray bottle filled with clean compressor oil
may be used to lubricate the faces of the seals
without touching the seal.
E) Install a new O-ring on the seal cover, making
sure the O-ring is placed in the O-ring groove
and not the oil gallery groove. Lubricate both
seal faces with clean compressor lubricating oil.
F) Carefully install the seal cover on the compressor
shaft, evenly tightening the bolts to the recom-
mended torque values.
G) Install the coupling and coupling guard. The unit
can then be evacuated and leak checked.
46
Service
MAIN ROTOR ASSEMBLY
Due to the procedures and tools in-
volved in the disassembly and reas-
sembly, the main rotor assembly must
be performed by qualified individuals.
Please consult the factory if mainte-
nance is required.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents