Honda GCV160 Owner's Manual page 15

Exclusions:
Failures other than those resulting from defects in material or workmanship are not
covered by this warranty. This warranty does not extend to emission control systems or
parts which are affected or damaged by owner abuse, neglect, improper maintenance,
misuse, misfueling, improper storage, accident and/or collision, the incorporation of, or
any use of, any add-on or modified parts, unsuitable attachments, or the unauthorized
alteration of any part.
This warranty does not cover replacement of expendable maintenance items made in
connection with required maintenance services after the item's first scheduled
replacement as listed in the maintenance section of the product owner's manual, such as:
spark plugs and filters.
Disclaimer of Consequential Damage and Limitation of Implied
Warranties:
American Honda Motor Co., Inc. and Honda Canada Inc. disclaim any responsibility for
incidental or consequential damages such as loss of time or the use of the power
equipment, or any commercial loss due to the failure of the equipment; and any implied
warranties are limited to the duration of this written warranty. This warranty is applicable
only where the California, U.S. EPA, or Environment Canada emission control system
warranty regulation is in effect.
Emission Control System Warranty Parts:
SYSTEMS COVERED
BY THIS WARRANTY:
Fuel Metering
Evaporative
Exhaust
Air Induction
Ignition
Miscellaneous Parts
Note: This list applies to parts supplied by Honda and does not cover parts
supplied by the equipment manufacturer. Please see the original equipment
manufacturer's emissions warranty for non-Honda parts.
* Covered up to the first required replacement only. See the Maintenance
Schedule (page 6).
PARTS
DESCRIPTION:
Carburetor assembly, (includes starting
enrichment system), Engine temperature
sensor, Engine control module, Fuel
regulator, Intake manifold
Fuel tank, Fuel cap, Fuel hoses, Vapor
hoses, Carbon canister, Canister
mounting brackets, Fuel strainer, Fuel
cock, Fuel pump, Fuel hose joint, Seal
cap, Canister purge hose joint
Catalyst, Exhaust manifold
Air filter housing, Air filter element*,
Crankcase breather tube
Flywheel magneto, Ignition pulse
generator, Crankshaft position sensor,
Power coil, Ignition coil assembly,
Ignition control module, Spark plug cap,
Spark plug*
Tubing, fittings, seals, gaskets, and
clamps associated with these listed
systems.
ENGLISH
15