Honda Car Engine G100 Owner's Manual page 16

Oil Change
Drain the engine oil when the engine is warm. Warm oil drains quickly and
completely.
1.
2.
3.
4.
Place a suitable container next to the oil drain bolt area.
Wipe the oil filler area clean, then remove the oil filler cap/
dipstick.
Remove the oil drain
bolt
and
sealing washer, and allow the
oil to drain into a suitable
container. After draining,
install the drain bolt with the
sealing washer and tighten it
securely.
With the engine in a level
position, fill with the recom-
mended oil.
Do
not overfill.
Measure the oil level as shown
on page 14.
DRAIN
BOLT
Engine oil capacity: 0.45
J?
(0.48 US qt)
Please dispose of used motor oil and the oil containers in a manner that is
compatible with the environment. We suggest you take used oil in a sealed
container to your local service station for reclamation. Do not throw it in the
trash, pour it on the ground, or down a drain.
I
NOTICE
I
Running the engine with a low oil level can cause engine damage.
5.
Reinstall the oil filler capldipstick securely.
15