Air Cleaner Cover - Honda Car Engine G100 Owner's Manual

AIR CLEANER
A dirty air cleaner will restrict air flow to the carburetor and cause poor
engine performance. Inspect the filter element each time the engine is
operated. You will need to clean the filter element more frequently than
usual if you operate the engine in very dusty areas.
p E i q
Operating the engine without a filter, or with damaged filter, will allow dirt
to enter the engine, causing rapid engine wear. This type of damage is not
covered under the Distributor's Limited Warranty.
Inspection
1.
Remove the wing nut, then remove the air cleaner cover. Be
careful to prevent dirt and debris from falling into the air cleaner
base.
2. Remove the foam filter element from the air cleaner base.
3. Inspect the filter element. Replace a damaged filter. Clean or
replace a dirty filter.
ELEMENT
CLEANING
1.
Clean the air filter with warm
soapy water, rinse, and allow to
dry thoroughly.
Or clean in nonflammable
solvent and allow to dry.
2. Dip
the filter in clean engine oil,
WING NUT
then squeeze out all excess oil.
The engine will smoke when
started if too much oil is left in
the foam.
Be careful to prevent dirt from entering the carburetor.
AIR CLEANER
COVER
3.
Wipe dirt from the air cleaner body and cover, using a moist rag.
16