Advertisement
How to Program Remote
Control Transmitters
3
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
Remote Control Code Programming
• For steps 2 through 12, each step must be completed within 5 seconds. For step 13,
within 10 seconds for each remote.
• Up to 3 remotes can be stored in memory.
• All remotes to be programmed must be on hand.
• A non programmed remote will work for this procedure.
• Turn the ignition key to the "OFF" position to complete the programming procedure.
1
2
3
4
5
Unlock the doors.
Turn the ignition key to the "ON" (II)
position.
Press the "LOCK" or "UNLOCK" button on
the remote control transmitter.
Turn the ignition key to the "OFF" (0, I)
position.
Turn the ignition key to the "ON" (II)
position.
9
Advertisement
