How to Program Remote
Control Transmitters
3
Remote Control Code Programming
• For steps 2 through 12, each step must be completed within 5 seconds. For step 13,
within 10 seconds for each remote.
• Up to 3 remotes can be stored in memory.
• All remotes to be programmed must be on hand.
• A non programmed remote will work for this procedure.
• Turn the ignition key to the "OFF" position to complete the programming procedure.
1
2
3
4
5
Unlock the doors and the tailgate.
Turn the ignition key to the "ON" (I I )
position.
Press the "LOCK" or "UNLOCK" button on
the remote control transmitter.
Turn the ignition key to the "OFF" (0, I )
position.
Turn the ignition key to the "ON" (I I )
position.
9