3.5” ExTErnAl EncloSurE uSEr MAnuAl MODEL 709040 MAN-709040-UM-0308-01...
Page 2
Thank you for purchasing the MANHATTAN eSATA, 3.5” External Enclosure, Model 709040. ® Fully SATA-capable and equipped with eSATA I-type ports, the chipset-free design quickly transfers data without conversion between SATA-enabled systems. Just install an idle, unused drive to create new and productive storage solutions. Additional features: •...
hArdwArE inSTAllATion NOTE: Images are for example only. Actual positions of switches or connectors may vary slightly. 1. Open the enclosure. 3. Tighten the sides screws 2. Connect the power and to secure the HDD. SATA cables to the HDD. eSATA 12 V DC On/Off...
SofTwArE inSTAllATion Windows 2000/XP 1. Click on the My Computer icon; click "Manage" to initialize the hard disk drive.
Page 5
2. Click "Disk Management," then click "Removable Disk," then click "Format."...
Page 6
3. Confirm that "Removable" and "FAT32" are entered/selected in the "Volume label" and "File system" fields, respectively. Click "OK." 4. When the warning prompt appears, click "OK."...
5. Click "My Computer" and confirm that the new "Removable" icon appears. The External Enclosure with hard disk drive is now ready for use. SpEcificATionS • SATA L-type internal data and power connections • eSATA I-type external connections • DC single-post power input (AC adapter included) •...
Need help?
Do you have a question about the 709040 and is the answer not in the manual?
Questions and answers