Table of Contents
Advertisement
English Manual
The Front LEDs
LED
1
Power
LAN Port
2
1X
-
(RJ-45 connector)
3
USB
4
Wireless
5
Mail
6
DSL
7
Internet
Chapter 2: Installing the router
Lit when power turns ON. Lit in red means the system is failed. To restart
the device or connect service provider for support.
Lit when one of LAN ports connected to an Ethernet device.
The speed of transmission hits 100Mbps appears Green;
4X
The speed of transmission hits 10Mbps appears Orange.
Blinking when data is Transmitted / Received.
Lit when the device connected to a USB device.
Flash when the device is sending/receiving data.
Lit green when the wireless connection is established.
Flashes when the device is sending/receiving data.
Flash once per second while wi-fi protected setup is in progress.
Lit green when there are emails in the Inbox.
Lit Green when the device is successfully connected to an ADSL
DSLAM.("line sync").
Lit green when IP connected.
Flashes green when IP connected and IP traffic is passing through the
device.
Lit red when device attempted to become IP connected and failed.
Lit off when device in bridged mode or when connection WAN is absent.
Meaning
8
Advertisement
Table of Contents
