Table of Contents
Advertisement
English Manual
Intrusion Detection
The router's Intrusion Detection System (IDS) is used to detect hacker attacks and intrusion attempts
from the Internet. If the IDS function of the firewall is enabled, inbound packets are filtered and
blocked depending on whether they are detected as possible hacker attacks, intrusion attempts or
other connections that the router determines to be suspicious.
Blacklist: If the router detects a possible attack, the source IP or destination IP address will be added
to the Blacklist. Any further attempts using this IP address will be blocked for the time period specified
as the Block Duration. The default setting for this function is false (disabled). Some attack types are
denied immediately without using the Blacklist function, such as Land attack and Echo/CharGen
scan.
Intrusion Detection: If enabled, IDS will block Smurf attack attempts. Default is false.
Block Duration:
Victim Protection Block Duration: This is the duration for blocking Smurf attacks. Default
value is 600 seconds.
104
Chapter 4: Configuration
Advertisement
Table of Contents
