Reversing The Door Handles - GE 16 Owner's Manual And Installation Instructions

REVERSING THE HARDWARE
4
4.2 Interchange hinge and screws at top right with
on hinge side at this time.
Installing the hinge on
the left.
NOTES:
for installing the hinge depends on which side you
install the hinge.
the edge of the case for correct installation.

REVERSING THE DOOR HANDLES

5
5.1 Transfer fresh food door handle
5.1.1 Remove the handle plug using a tape-tipped
putty knife under the edge, and remove the
screw underneath. Remove the two screws
holding the handle to the top of the door.
Plug
5.1.2 Remove the handle.
Installation Instructions
(CONT.)
Do not tighten screws
Installing the hinge on
the right.
Top
REVERSING THE DOOR HANDLES
5
5.1.3
left side of the door and insert it into the hole on the
hinge.
Plug Button
5.1.4
transfer it to the opposite side.
5.2 Transfer door stop
5.2.1 Move the plastic door stop and screws from
the right side to the left side.
Plastic Door Stop
Left Side
5.3 Reinstall the fresh food door handle
5.3.1 Attach the handle to the right side of the
door with screws at the top
and under the handle plug.
5.3.2 Reinstall the handle plug.
15
To reattach the
handle on the
Plug Button
opposite side.
Right Side
(CONT.)