Reversing The Door Swing - GE 16 Owner's Manual And Installation Instructions

2

REVERSING THE DOOR SWING

IMPORTANT NOTES
them in the wrong places.
IMPORTANT:
door-swing reversal is completed.
These instructions are for changing the hinges from the
and reverse all references to left and right.
TOOLS REQUIRED
Phillips screwdriver
5/16"
socket driver
Putty knife or thin-
BEFORE YOU START
1
1.1 Unplug the refrigerator from its electrical outlet.
1.2 Empty all door shelves, including the dairy
compartment.
CAUTION:
do so could damage the door stop.
Installation Instructions
Masking tape
5/16" open-end
wrench
13
REMOVE THE FREEZER DOOR
2
2.1 Tape the door shut with masking tape.
2.2 With a 5/16"
2.3 Lift the hinge straight up to free the hinge pin
from the socket in the top of the door and set it
aside, along with its screws.
Top Hinge
2.4 Remove the tape and tilt the door away from the
2.5 Set the door on a non-scratching surface with
the outside up.
2.6 Transfer the 2 screws from the opposite side of
hinge removal.