Putting On The Carrier: Backpack Position - Infantino Flip Owners Manual Instructions

Step 2. Putting on the carrier: Backpack position
5.
Fasten the "head support buckle" by inserting
the upper portion of the buckle (on the
shoulder strap) into the lower section (located
on the head support). Push the buckle together
until you hear a click. Ensure that the buckle
is locked in place by trying to pull it apart.
Adjust tightness of "head support buckle" as
necessary.
6.
RECOMMENDED: If another person is available,
have him or her lift the child in the carrier to
the proper height. Slip your arms through the
"shoulder straps" and connect the "chest/back
strap" (located on the "shoulder straps"), and
the "lumbar support belt." Adjust all straps and
the belt for a proper fit, while your partner
continues to support the weight of the child.
6A.
ALTERNATIVE: If it is necessary to put the carrier on
without assistance, set the carrier and baby in a
secure corner (like a couch) so that baby's back
is supported and the baby is sitting upright. Keep
the straps clear of the baby's face.
7.
Gently sit in front of the baby close enough for
the child's legs to wrap around your body.
* IMPORTANT! NEVER lean against the baby. ALWAYS
make sure there is enough room around your baby's
face to provide a clear source of air.
11.